2012-07-27

CNC Mill and Honda GX25 engine ordered

I had previously decided to make my own CNC Mill as part of this project. That was before I got money on my hands, and before I found a great offer on a used CNC Mill.

EMCO F1P-CNC Mill (to the right )with matching
EMCO tronic M1 controller (to the left).
Image shamelessly copied of the internet.


I have ordered it, and it will be arriving at my apartment in a week. It is an old "EMCO F1P" with a matching control/monitor unit "M1". Mor details will follow as I "unbox" it.

I also bought a Honda GX25 mini 4-stroke 1-cylinder petrol engine. If you have seen the post about power and electronics you will know that I intended to use a generator on board to provide longer range.

The engine arrived just 1 day after I ordered it, the unboxing of which will follow in a later post.


6 comments:

  1. Nice post mate, keep up the great work, just shared this with my friendz 5-axis

    ReplyDelete
  2. Hoping to see more vehicle options like Honda Civic 2020, because I like the brand Honda.

    ReplyDelete
  3. Writing with style and getting good compliments on the article is quite hard, to be honest.But you've done it so calmly and with so cool feeling and you've nailed the job. This article is possessed with style and I am giving good compliment. Best! this link

    ReplyDelete
  4. Wow, cool post. I'd like to write like this too - taking time and real hard work to make a great article... but I put things off too much and never seem to get started. Thanks though. once-tech.com

    ReplyDelete
  5. This is such a great resource that you are providing and you give it away for free. I love seeing blog that understand the value of providing a quality resource for free. environmental chamber

    ReplyDelete
  6. you could have an incredible blog right here! would you like to make some invite posts on my blog? sheet metal laser cutting machine

    ReplyDelete